DZK 1800

We build the DZK 1800 for you with 3 different engines in the variants S / P / KP.

We build the DZK 1800 for you with 3 different power units in the variants S / P / KP. These stand for S = swing arm; here the friction wheel pairs are pressed against the rail via a pivot point to which a swing arm is attached. With P parallel drive units, the friction wheels are pressed parallel to the rail via a low-friction roller guide. In the most modern KP version, the parallel drive variant, this guide has been optimised even further and offers even higher holding forces in a smaller installation space. The KP version allows you to realise the shortest overall train lengths.

Spezifications

Product features diesel-locomotive DZK 1800
  • Economical 80 kW 4 cylinder turbo diesel engine
  • Wet exhaust gas cooling
  • Travel drives with swing arm or parallel pressure system
  • Powerful generator with 4 separate power supplies (3 intrinsically safe)
  • Hydraulic engine starter, optionally remote-controllable
  • Modular design
  • Intrinsically safe control system
  • Data exchange with the mine IT infrastructure
  • Parallel drive units allow constant contact forces, independent of the direction of travel, and thus enable safe and frictionless travel
  • The modular design allows easy reconfiguration of the train composition by the user at the mine without the mandatory use of new parts. Your DZK is therefore also adaptable to future requirements.
  • High operational safety and reliability proven in hundreds of applications in all mining regions of the world.
Configuration Minimal Standard Maximal
DZK1800 2+1 KP/P/S DZK1800 3+3 KP/P/S DZK1800 5+5 KP/P/S
Number of drives 3 6 10
Tractive force 60 kN 120 kN 200 kN
Max. Speed* 3,4 m/s 1,7 m/s 1 m/s
Haltekraft KP (P/S) 90 (90/50) kN 198 (198/82) kN 342 (342/114) kN
Friction wheel diameter 340 mm, optional 450 mm
Electrical system
Operating voltage 3 x 12 V /  2 A
Protection class SYST IM2 Exib I
Diesel engine
Type 4-Cylinder /  Turbo Diesel
Rated power 130 kW bei 1.800 min-1
Starter Hydraulic
Protection class ATEX
Exhaust gas cooling system Encapsulated water cooling circuit
Operating conditions
Ambient temperature -10° C  bis  +40° C
Relative humidity 90 %
Horizontal curve radius Min. 4 m
Vertical curve radius Min. 8 m
Max. Rail inclination 30 Degrees